Enum Orientation

Namespace

Northwoods.Go

Assembly

Northwoods.GoDiagram.WinForms.dll

This enumeration specifies possible values for SegmentOrientation.

public enum Orientation

Fields

Along = 1

Rotate the object to have the same angle as the segment it is at; use this orientation for arrow heads.

Minus90 = 3

Rotate the object counter-clockwise 90 degrees to be perpendicular to the angle of the segment it is at.

Minus90Upright = 7

Rotate the object counter-clockwise 90 degrees to be perpendicular to the angle of the segment it is at, just like Minus90, but never upside down; this is typically only use for TextBlocks or Panels that contain text.

None = 0

Do not rotate the object along the segment.

Opposite = 4

Rotate the object to be 180 degrees opposite from the angle of the segment it is at.

Plus90 = 2

Rotate the object clockwise 90 degrees to be perpendicular to the angle of the segment it is at.

Plus90Upright = 6

Rotate the object clockwise 90 degrees to be perpendicular to the angle of the segment it is at, just like Plus90, but never upside down; this is typically only use for TextBlocks or Panels that contain text.

Upright = 5

Rotate the object to have the same angle as the segment it is at, just like Along, but never upside down; this is typically only use for TextBlocks or Panels that contain text.

Upright45 = 8

Rotate the object to have the same angle as the segment it is at, but never upside down and never angler more than +/- 45 degrees: when the segment's angle is with 45 degrees of vertical (90 or 270 degrees), the object's angle is set to zero; this is typically only use for TextBlocks or Panels that contain text.